Click here to visit the Tuff Rider website. Get A Zolatone AIM Catalog Contact Zolatone Automotive, Industrial, and Marine Zolatone AIM Home Page Click here to visit the Tuff Rider website. Click here to visit Zolatone's SeaLife page. Frequently Asked Questions Environmental Compliance and Warranty Manufacturer's Safety Data Sheets Spray Equipment and Methods of Applying Zolatone Zolatone 20 Series Specifications Understanding Zolatone Coatings Zolatone Intermix Program Zolatone Primers Zolatone Zo-Pol Epoxy Clear Coat Zolatone Power Spray Kit Zolatone Strippable Booth Coat Zolatone 20 Series Multicolor
 
ZOLATONE Epoxy Primer-Sealer
9271 Zo-Epoxy Primer-Sealer for Metals and Plastic
9271 Zo-Epoxy Primer-Sealer is a very fast dry, fast curing epoxy primer that has very good corrosion resistance and adhesion. This primer-sealer is designed for use over properly cleaned and sanded or etched aluminum, properly cleaned and sanded steel, clean deoxidized galvanized steel, properly cleaned and sanded stainless steel, properly cleaned and sanded fiberglass/SMC, all other cured primers and paints, as well as automotive plastics (except polyethylene.) Zo-Epoxy Primer-Sealer can be top coated with all top-coat finishes, including acrylic lacquer. For more information download the 9271 Tech Data Sheet in Acrobat PDF format.
Part No. Description
9271-0001-QT Zo-Epoxy Primer-Sealer, White, Quart
9271-0001-1G Zo-Epoxy Primer-Sealer, White, Gallon
9271-0081-QT Zo-Epoxy Primer-Sealer, Gray, Quart
9271-0081-1G Zo-Epoxy Prime-Sealerr, Gray, Gallon
9271-0006-QT Zo-Epoxy Primer-Sealer, Black, Quart
9271-0006-1G Zo-Epoxy Primer-Sealer, Black, Gallon
9271-000C-QT Zo-Epoxy Primer-Sealer, Catalyst, Quart
9271-000C-1G Zo-Epoxy Primer-Sealer, Catalyst, Gallon
FEATURES
• May be topcoated in 30-60 minutes
• Good corrosion resistance in harsh environments
• Good humidity resistance
• Excellent color holdout
• Superior adhesion to bare steel, sanded fiberglass and etched or sanded aluminum
• Economical price
• Tintable

9271 Technical Information

Application:
• Mix 1 part 9271 Zo-Epoxy Primer-Sealer with 1 part 9271-000C Zo-Epoxy Primer-Sealer Catalyst.
 • Spray catalyzed primer at 40-50 P.S.I. air pressure.
• Apply 1 to 2 wet coats. Allow 10 to 15 minutes dry time between coats. Dry film should be .75 to 1.0 mil.
• Allow 30-60 minutes dry time before topcoating. Thinner coats will reduce dry time before topcoating.
• Zo-Epoxy Primer can be topcoated with all finish coatings.
Technical Data:
• Mix Ratio 1:1
• Pot Life 2 Hours @ 70° F, 50% RH
• Number of Coats 1-2 Medium Wet
• Gun Set-Up Gravity Feed 1.4 -1.8 mm
• HVLP Pressure 10 PSI (max)
• Conventional Pressure 30-35 PSI
Flash Point:
23°F
V.O.C.:
 Mixed/Sprayable: 2.70 lbs./gal. (324 g/l), Limit 5.0, Actual RTS V.O.C. 2.65 , % Solids RTU by Weight 36%
Theoretical Coverage:
Coverage ft =/ gal. @ 1 mil: 409; calculated using medium speed activator and/or reducer.
Dry Time:
• Flash Time 10-15 min.
• Recoat w/o Sanding 30-60 min.
• To Sand 70°F (21°C), 50% RH 30 min.
• Force Dry 20 min. @ 140° F
• Infrared Dry 10-15 min. @ 18-36 inches

ZOLATONE Basecoat Primers
Z91 Zo Ferro Basecoat Primer-Sealer for Metal
ZO-FERRO® is a one-component, water based, low VOC, rust inhibiting, non-sanding basecoat primer and sealer. ZO-FERRO metal primer-sealer offers corrosion protection on metal surfaces which helps vehicles retain their anti-corrosive structural integrity. Made specifically for use with Zolatone 20 coatings, ZO-FERRO metal primer sealer is intended for previously painted surfaces; however, it is acceptable to use on prepared bare aluminum.
VOC compliant and ISOCYANATE FREE, non-sanding ZO-FERRO is ready to use with no reducing or thinning needed. ZO-FERRO provides excellent adhesion and flexibility over virtually all types of ferrous metal surfaces and aluminum for both interior/exterior use. Metal surfaces can be primed ahead prior to painting.
Part No. Description
Z91-02 Zo-Ferro Metal Primer, White
Z91-06 Zo-Ferro Metal Primer, Black
Z91-81 Zo-Ferro Metal Primer, Gray

Z91 Technical Information

Application:
Apply by spray only. Apply one medium wet coat at 50 lbs. pressure at the gun. Clean with water immediately while wet; lacquer thinner after dry. Do not allow to dry in the gun or equipment.
1. New galvanized metal must be chemically treated prior to priming and painting.
2. Rusted metal should be treated with a rust converting or removing solution prior to priming with Z91 ZO-FERRO.
Technical Data:
59.46% solids by weight. 44.51% solids by volume. (Approx.)
Weight:
11.3 pounds/gallon.
Flash Point:
Water based, not applicable
V.O.C.:
Coating less water - 98.4 gms/liter; 0.82 lbs./gal. Material with water - 51.6 gms/liter; 0.43 lbs./gal.
Theoretical Coverage:
Approx. 250-400 sq. ft./gal. depending upon surface roughness and method of application.
Dry Time:
Tack free 15-30 min.; one hour to recoat at 70 degrees Fahrenheit and 50% humidity.

Z97 Zo Multi Basecoat Primer-Sealer
Water Based
ZO-MULTI® is a one-component, bond coat, water based, fast drying, flexible, non-sanding primer and sealer. ZO-MULTI primer-sealer is formulated with a 100% acrylic resin for excellent adhesion over a wide variety of surfaces. Made specifically for use with Zolatone 20 coatings, ZO-MULTI is intended for use as a primer- sealer and barrier coat over plastics, fiberglass, woods, and glass.
VOC compliant and ISOCYANATE FREE, non-sanding ZO-MULTI is ready to use with no reducing or thinning needed. ZO-MULTI provides excellent adhesion and flexibility for both interior/exterior use.
Part No. Description
Z97-01 Zo-Multi Primer, White
Z97-44 Zo-Multi Primer, Black
Z97-81 Zo-Multi Primer, Gray

Z97 Technical Information

Application:
Apply by spray only. Apply one medium wet coat at 50 lbs. pressure at the gun. Clean with water immediately while wet; lacquer thinner after dry. Do not allow to dry in the gun or equipment.
NOTE: When used on some woods, there may be raising of the grain. It is advisable to coat a small section of wood to determine whether ZO-MULTI can be used without any problems.
Technical Data:
55.56% solids by weight. 44.44% solids by volume. (Approx.)
Weight:
11.04 pounds/gallon.
Flash Point:
Water based, not applicable
V.O.C.:
Coating less water - 91.2 max. gms/liter; 0.76 lbs./gal. Material with water- 43.2 gms/liter; 0.36 lbs./gal.
Theoretical Coverage:
Approx. 350-400 sq. ft./gal. depending upon surface roughness, porosity, and method of application.
Dry Time:
Tack free 15-30 min.; one hour to recoat at 70 degrees Fahrenheit and 50% humidity.
Z98 Zo Multi Basecoat Primer-Sealer
Solvent Based
Z98 ZO-MULTI® is a high performance, bond coat, fast drying, flexible, non-sanding primer and sealer. This ZO-MULTI primer-sealer is a modified alkyd resin formulation with an extremely high solids content for excellent adhesion over a wide variety of difficult surfaces. Made specifically for use with Zolatone 20 coatings, Z98 ZO-MULTI is designed to adhere tenaciously to dense, non-porous surfaces. Can be used in exterior or interior applications on plywood, tile, Masonite, non-ferrous metals, and plastics.
Part No. Description
Z98-02 Zo-Multi Primer, White
Z98-06 Zo-Multi Primer, Black

Z98 Technical Information

Application:
Apply by spray only. Apply one medium wet coat at 50 lbs. pressure at the gun. Clean with lacquer thinner. Do not allow to dry in the gun.
Technical Data:
67% solids by weight. 52% solids by volume. (Approx.)
Weight:
10.1 pounds/gallon.
Flash Point:
24 degrees Fahrenheit TCC.
V.O.C.:
Coating and Material - 400 max. gms/liter; 3.33 lbs./gal. (Approx.)
Theoretical Coverage:
Approx. 325-525 sq. ft./gal. depending upon surface roughness, porosity, and method of application.
Dry Time:
Tack free 15-30 min.; one hour to recoat at 70 degrees Fahrenheit and 50% humidity. Must be recoated within 48 hours for proper adhesion.

Generally, this product is compliant with local Air Quality Management Districts. Users are ultimately responsible for determining applicable regulatory status. Consult with local regulatory agency for allowable usage conditions and disposal methods.
© Quest Specialty Chemicals, Inc. 2002-2007 All Rights Reserved